Electro-thermal homogenization of HTS stacks
by administrator on Aug 1, 2024 5:06:53 PM
This model was shared by C. Klop, Norwegian University of Science and Technology (NTNU)
Analytical model for AC losses in HTS tapes
by administrator on Mar 20, 2024 2:49:29 PM
This model was shared by João Fernandes, Instituto Superior Técnico, Ulisboa. This work proposes two alternative analytical models to evaluate the AC losses of High-Temperature Superconducting (HTS) tapes during their hysteretic and resistive modes. Two analytical models are proposed, …
Python and Matlab codes to model HTS tapes under arbitrary external field and transport current via integral method
by administrator on Mar 20, 2024 2:44:41 PM
This model was shared by Calvin C. T. Chow, The University of Hong Kong. These Python and Matlab codes calculate ac loss of HTS tapes that are under two types of non-uniform external field whilst carrying a transport current. The two types are (1) field created by a point current sour …
Alternative to the H-formulation for critical state simulation in HTS materials
by administrator on Mar 20, 2024 2:41:57 PM
This model was shared by Dong Keun Oh, Korea Institute of Fusion Energy. This model is developed as an attempt of static H-formulation to substitute for the magnetic formulation (A-formulation) of “the self-consistent static critical current model” which has been recognized as an effi …
Fully-staggered array of bulk REBCO short-period undulator: large-scale 3-D electromagnetic modelling and design optimization using A-V and H- formulations
by administrator on Mar 20, 2024 2:38:19 PM
This model was shared by Kai Zhang, Paul Scherrer Institute, Switzerland and Mark Ainslie, University of Cambridge, UK. In this shared model, implemented in ANSYS 2020R1 Academic, the theory of the 2D A-V formulation-based backward computation method is extended to calculate the criti …
COMSOL implementation of the H-ϕ formulation with thin cuts for modeling superconductors with transport currents
by administrator on Mar 20, 2024 2:35:57 PM
These models were shared by Alexandre Arsenault, Polytechnique Montréal, Montréal. These two models use thin cuts with the H-phi formulation in COMSOL Multiphysics 5.5 to efficiently model transport currents in superconducting materials. The magnetic scalar potential is set to be disc …
Modeling of HTS bulks surrounded by magnetic components using the H–φ formulation
by administrator on Mar 20, 2024 2:31:30 PM
These models were shared by Alexandre Arsenault, Polytechnique Montréal, Montréal. These two models use the reduced H-phi formulation to efficiently simulate the magnetic field of a superconducting bulk surrounded by magnetic components. The magnetic field is separated into a source a …
Coupled A-H formulation for magneto-thermal transients in HTS magnets
by administrator on Mar 15, 2024 2:07:11 PM
These models were shared by shared by Lorenzo Bortot, CERN. The two models implement a coupled A-H field formulation in FEM, solving for H in the superconducting tapes, and for A elsewhere. The tapes are represented either by means of 2D domains or 1D thin-shells. For the second case, …
New benchmark problem for electromagnetic modelling of superconductors: the high-Tc superconducting dynamo
by administrator on Mar 15, 2024 1:53:53 PM
The high-Tc superconducting (HTS) dynamo has recently been proposed as a new benchmark problem for the HTS modelling community. The benchmark geometry consists of a permanent magnet rotating past a stationary HTS wire in the open-circuit configuration and assumes for simplicity the 2D …
AC losses calculation in REBCO coils or stacks
by administrator on Mar 15, 2024 1:51:04 PM
This model can calculate HTS stack/coil with various applied current and magnetic field. Its greatest advantage is the calculating speed could be very fast. The model is calculated by integration method, which was first proposed by Brandt for HTS tape. Here it is extended to ReBCO sta …
